Saturday, September 29, 2012

Pallet table





  1.  I first had to Take all the planks off both sides tho I did leave the end one on so that the support beams stayed in place.
  2.  Sanded the planks on both sides like bad outer layer was gone and smooth.
  3. Paint the planks with a generous amount of polyurethane. Let Dry.
  4. Get new screws and screw boards onto frame.
Supplies:
Pallet, Polyurethane, screws
Cost: screws were $5, poly. I had already, pallet was free {ask around, check behind stores, craigslist}

 

 

No comments:

Post a Comment